Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

 
 
 

1. Chemical product and company identification

Trade name

:

Palm Fatty Acid

2. Composition / ingredients

Chemical composition

:

98% t.f.m

3. Hazard identification (reference: 4)

Health rating

:

Slight

Flammability rating

:

Slight

Reactivity rating

:

Slight

Contact rating

:

Slight

Storage

:

General

4. First-aid measures (reference: 4)

Ingestion

:

Drink plenty of water.

Skin

:

Remove contaminated clothing and wash exposed area with plenty of water. Then wash again with soap and water.

Eye

:

Wash eyes with plenty of water.

Inhalation

:

Take affected person into the open air and allow him to rest.

*In all of the above cases, get a doctor to check the affected person.

5. Fire hazard and fire-fighting measures (reference: 1, 4)

Flammability

:

Flammable and combustible in contact with heat or fire.

Means of extinguishing

:

Use water spray, carbon dioxide, dry chemical, or alcohol foam. Use water to keep fire-exposed container cool.

Hazardous combustion product

:

Organic cracked hydrocarbons and carbon oxides

6. Accidental release measures (reference: 4)

Personal protection

:

Use complete protective gear as prescribed in section 8. There's a high risk of slipping since the product is greasy.

Leak-and-spill procedures

:

Remove sources of ignition, ventilate area, sweep up the liquid in dry sand, and shovel it into a closed container. Collect spillages into sumps / traps to minimize contamination of drains, surface and ground water.

7. Handling and storage measures (reference: 4, 5)

Handling containers

:

Use full protective gear. Protect containers against physical damage / direct sunlight / water.

Storage conditions of containers

:

Use leak-proof and compatible drums. Store in dry and well-ventilated locations, at ambient temperature away from direct sunlight.

8. Exposure controls and personal protection measures (reference: 4, 5)

Engineering controls

Use adequate ventilation to keep airborne concentrations low. Avoid inhalation of heated vapours.
TLV: None listed.
PEL: None listed.

Personal protection

Skin

:

Rubber gloves

Respiration

:

Air respirator

Eyes

:

Goggles

Feet

:

Safety shoes

Body

:

Lab coat

Hygiene precautions

:

Remove contaminated clothing and wash hands between breaks and at the end of duty hours.

9. Physical and chemical properties (reference: 1, 4, 5)

Physical state

:

Semi Solid

Odour and appearance

:

Brownish yellow semi solid with palm odour

Specific gravity

:

0.895 at 17.7° C

Solubility in water (20° C)

:

Insoluble

10. Reactivity data (reference: 4, 5)

Chemical stability

:

Product is stable under the prescribed storage conditions.

Hazardous decomposition

:

Acid smoke and irritating fumes when heated above its boiling point.

Hazardous polymerization products

:

None

11. Toxicological properties (reference: 2, 3, 4, 5)

Toxicity

:

Toxic

Skin contact

:

Slight erythema

Inhalation

:

Slight

Skin absorption

:

Slight

Ingestion

:

rat LD 50 > 21.5 ml/kg

Effect of acute and chronic exposure to material

:

The extensive use of Fatty Acid in industry has not been accompanied by any reports of injury.

Irritancy of material

:

Slight

Carcinogenicity, reproductive effects, terratogenicity, mutagenicity

:

None reported

12. Ecological information (reference: 4, 5)

The product should not get into any kind of water without treatment. Dissolved in water, the material is easily biodegradeable (90 per cent) and will not cause any disturbance in waste water treatment plants. Due to its insolubility in water, larger amounts need to be eliminated by separators such as those typically used for fats and oils.

13. Waste disposal (reference: 4, 5)

Leak-and-spill procedures

:

Sweep up the liquid in dry sand and shovel into a closed container.

Disposal

:

Stored waste / recovered material used for recycling along with crude oils.

14. Transport recommendation (reference: 4, 5)

No special conditions since it is not a regulated product. However, one should observe the usual precautionary measures for transporting chemicals.

15. Regulatory requirements (reference: 4, 5)

According to available data, the product is not regulated. However, one should observe prescribed federal, state and local measures while dealing with chemicals.
Hazard identification: irritant
Risk phrases: R 36, 38
Safety phrases: S 2, 24, 25
The above mentioned classification is valid for industrial users of this product.

Disclaimer
The information presented here is believed to be accurate. It pertains only to the product when stored in a sealed condition, as prescribed here. The information is given in good faith, but no warranty, express or implied, is made. Users should make their own investigations, for their specific applications and processes, to determine the suitability of the safety information mentioned here. Dinesh Sales Corporation will in no way be liable for any claims, losses and / or damages of any third party, or for lost profits, or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, from the use of this product.

 
 
Web : www.dineshsales.com
  www.dineshsales.in
  www.dnlgroup.in
 
Home  | Profile  | Products  | Contact Us Designed & Hosted by : MID   Promoted by : GID